Canadian Security Magazine

Port of Halifax gets PureTech surveillance software

By Andrew Wareing   

News Transportation

Since 9/11, ports and harbours have come under increasing pressure to upgrade and improve their security and the Port of Halifax is no exception.

Phoenix, Ariz.-based PureTech Systems Inc. announced May 1 that its PureActiv video surveillance software was chosen for the Halifax Port Authority Command and Control System (HPACCS) designed by U.K.-based Ultra Electronics. 

According to Ultra, the $8 million system will display radar tracks on
electronic charts, annotate them with data transmitted by the vessel’s
Automatic Information System (AIS) transponder and automatically cue
cameras onto targets of interest using intelligent object recognition,
tracking and scene analysis.

The system incorporates access control,
perimeter fence monitoring, chemical detection and an incident
management system.
The system is part of an overall $20 million project to improve
security at the port including physical perimeter improvements,
credentialing of people who are to have access to the port and
improvements to its command and control system which includes the
PureTech component.

Funding for the Port security project is being provided on a 75/25
split between Transport Canada and the Halifax Port Authority under the
Marine Security Contribution program.

“The standard requirement was to have the system monitored by one
person,” says Halifax Port Authority marine security and cruise
operations manager Gord Helm, adding that the PureTech system is an
improvement from the classic system of having one person monitoring 50
cameras “which, for most people, lasts about 20 or 30 minutes with any
effectiveness.”

Advertisement

Now, the operator will have a large virtual map of the harbour which
the system will cue to the operator in the event of a situation that
demands their attention, either in summoning security personnel to
investigate, summoning the Port detachment of the Halifax Regional
Police or calling for emergency response such as the fire department.

“You have to look at the PureTech control as a component of a fused
command and control system/regime. It is a critical component in that
it provides an overlay of algorithms that have virtual keys and rules
enabling us to establish virtual barriers around sensitive areas on
land and in the water,” Helm says. “This is taking it to a new level
and doing something that has not been done in the past. Right now, you
have a number of cameras monitored but not a cued monitoring process.
You have to call up a camera, and slew it to where you want it to go.
This is a significant departure from what we’ve been doing.”


Print this page

Advertisement

Stories continue below


Related

Leave a Reply

Your email address will not be published. Required fields are marked *

*